• +1 514-259-4884

Field Strength Logging and Surveillance mobile System

  • Brand: spytronic
  • SKU: SPT-WIN-PFSL-G3
  • Availability: In Stock

Until recently, the task of mobile field strength logging, monitoring and surveillance typically required several pieces of conventional equipment interconnected into bulky and expensive systems. The PFSL-G3 system provides an...

Tags:

Until recently, the task of mobile field strength logging, monitoring and surveillance typically required several pieces of conventional equipment interconnected into bulky and expensive systems.

The PFSL-G3 system provides an elegant, fully integrated solution, specifically designed for mobile "drive-by" signal coverage measurements, field strength mapping, mobile surveillance and other similar investigative operations. The system even employs an integrated GPS receiver to display and store geographical co-ordinates of the measured signal. The logged data include time, date, latitude, longitude and altitude.

Includes:

  • This system is enclosed in a ruggedized easily transported enclosure, which contains the control computer, the receiver and rechargeable battery. It can be powered from three sources: Internal rechargeable batteries, a vehicle's 12V DC power outlet or mains power. Leads to connect to mains and the vehicle power outlet are included. The enclosure features dual fans for cooling and built-in fuses protect system components. The GPS, receiver antenna and power connectors are easily accessible.
  • The PFSL-G3 system is based on G-315e receiver and on AMFE Antenna Multiplexer and Frequency Extender, making it possible to achieve the necessary high level of integration.

Bandwidth: 50 - 15000 Hz

Dimensions: 460mm x 330mm x 165mm

Type: simple

Frequency: Range input: SHF: 1796 MHz to 8599 MHz

Frequency Stability: 0.5 ppm (0 to 60° C)

Gain: HF: 0 to 3 dB, VHF: 5 to 7 dB, UHF: 1 to 5 dB, SHF: -3 to 12 dB

Image Rejection: 1.8-150 MHz: 60 dB typ., 150-1800 MHz: 50 dB typ.

Input: 50 ohm ( SMA Connector)

Interface: 5 x SMA, USB (1.0 and 2.0 compatible)

Intermediate frequencies: IF1: 109.65 MHz, IF2: 16 kHz

Internal spurious: Typically less than equivalent antenna input of -105 dBm

LO leakage to IF: Better than -56 dBm

Max. input: +18 DBm

MDS: +18 DBm

Mixer Spurious Rejection: Better than -40 dBc

Mode: AM, AMS, LSB, USB, DSB, ISB, CW

NF: HF: 2,5 dB, VHF: 6 dB, UHF: 3,5 dB, SHF: 8 dB

Output: Digitized IF and audio signal over USB interface

Phase noise: -148 dBc/Hz @ 100 kHz

Receiver type: DSP-based SDR with DDS-based dual-conversion superheterodyne front end

Roofing filter: 2 x 4-pole 20 kHz crystal filter

RSSI accuracy: 2 dB

RSSI sensitivity: -137 DBm

Size: 30

Tuning resolution: 1 Hz

Timer Spurious-free dynamic range: 90 dB

Isolation Input/Output: HF, VHF: 40 dB min., UHF, SHF: 30 dB min.